# Measurement Tool **Description:** A Measurement Tool is an item that can be used to create jumps.
Do not destroy jumps by hand or the jump controller will remain! **Always delete jumps via the Jump Builder GUI.**
--- **Details:****Rarity color:** | Common |
**Renewable:** | Yes |
**Stackable:** | Yes (64) |
**Durability:** | None |
Error messages can be seen above the inventory hotbar when the Measurement Tool is used incorrectly.
**Creating A Jump** Measurement tool is required to create custom jumps. Follow this step by step method to use the tool. 1. Place **any** block (ie dirt) on the ground 2. Move sideways (straight line) and place a second block exactly 5 blocks away (Block - 5B space - Block) 3. Stand in front of one block (looking at it) and right-click the block with a measurement tool in hand 4. Stand in front of the second block (looking at it) and right-click the block with a measurement tool in hand 5. This should bring up the Jump Builder GUI **Customizing Jumps** You need to interact with the Jump to customize it's features. The Jump Builder GUI (menu) is automatically opened when a new jump is made, and can be opened again at any time by right-clicking on a jump with a measurement tool.Edit Obstacle | **Type:** Left click the **None** button next to Layer to cycle forward through obstacles, right click to go back. |
**Color:** Left click the color button next to an obstacle to cycle through colors, right click to go back. | |
Some obstacle variants do not have a color option (logs etc) | |
Edit Levels | **Add:** Left click the '**Add Layer**' button in the top left of the GUI to add a new layer (One block higher) |
**Delete:** Left click the '**Delete Layer**' button in the top left of the GUI to delete a layer (One block lower) | |
Edit Standards | **Type:** Left click the button next to '**Standards**' to cycle between jump standards (posts that support poles) |
Delete Jump | If you want to get rid of the **entire** jump, left click the 'Destroy' button in the top right of the GUI. |
Do not destroy jumps by hand or the invisible jump controls will remain! | |
Exit GUI | Press the escape key to exit out of the Jump GUI at any time. |
Indoor arenas should have a minimum of 11B height clearance if intended to support max-level jumps. This height is the peak point at a max level jump where a rider and horse would comfortably avoid collision with the roof.
**** **Shown:** Jump Builder GUI showing a new jump (blank options) and a 2B vertical jump with rails in blue colors. --- #### **Options****Base Elements (Obstacles)** - Can be used on Layer 1 Only | ||
Log | A solid oak log block (slightly thinner than a normal block) ideal for XC jumps. | None |
Pole On Box (Small) | A pole on a small X shaped box, ideal for training and cavaletti | 16 Colors |
Pole On Box (Large) | A pole on a slightly higher X shaped box, ideal for training and cavaletti | 16 Colors |
Brush Box | A small bushy plant in a whitewash planter, ideal for Show Jumping | None |
Flower Box | A small planter of colorful flowers, ideal for Show Jumping | 16 Colors |
Coop | A small triangular fence obstacle, ideal for XC jumps or dressage borders | None |
Roll Top | A quarter-circle curved obstacle, ideal for XC jumps | 16 Colors |
Wall Mini | A brick-wall slab | None |
Ground Pole | A simple striped pole that sits directly on the ground, ideal for training and cavaletti | 16 Colors |
**Elements (Obstacles)** - Can be used on any Layer (1-5) | ||
None | No visible obstacle for that layer (will still have an invisible obstacle) | N/A |
Rail | A simple striped pole | 16 Colors |
Plank | A striped plank | 16 Colors |
Plank Fancy | A solid-color wavy plank | 16 Colors |
**Standards** (Support Posts on the side of a jump) | ||
None | No standards - Jumps with poles or planks may appear to float without standards | N/A |
Schooling | A simple upright post with a small base. | N/A |
Radial | A wider based standard with a circular pattern (level 3+) | N/A |
Vertical Slat | A wider based standard with a simple wooden slat design | N/A |
It is strongly recommended that jumps (and other multiblock items like stall doors) are deleted prior to taking a WorldEdit selection to avoid issues. Including jumps and stall doors in WE Schematics **can potentially corrupt schematics.**
--- #### **Changelog**This is not a complete list of version changes / fixes. It is a changelog of relevant wiki-related version information.
**MC Version** | **Release** | **Notes** |
1.18.2 | 1.18.2-1.0.0 | Measurement Tool crafting recipe changed to remove Amethyst, and require less iron (3 > ~1.2) |
1.16.5 | 1.16.5-0.5.3.21 | **\[Deprecated Recipe\]** **** |